Driver and Resetter Printer

Tuesday 8 September 2015

CARA MERISET PRINTER BROTHER LASERJET SETELAH DI REFIL SERBUK TINTA


image brother

cara riset printer brother laserjet

1. Tuanglah serbuk tinta ke dalam cartridge.

2. isi dengan ukuran full.

3. pasang kembali cartridge ke printer brother

4. langkah meriset,

BUKA COVER DEPAN,

TEKAN TOMBOL CLEAR,

TEKAN TOMBOL STAR,

TEKAN TOMBOL PANAH ATAS,

TEKAN TOMBOL PANAS BAWAH,

TEKAN TOMBOL OK,

Printer brother laserjet anda siap di gunakan kembali,,

semoga bermanfaat buat sobat,,

cara riset printer brother laserjet

Tuesday 23 June 2015

HOW SERVICE EPSON L210 OFF TOTALY

Hi beak beak champion, champion this long, I do not take care of the blog, because many service entrance before Eid.

Well this time champion wants to share how to service the printer made in Indonesia ya that's easy to die

An early indication of when the printer is turned on do not want to live there are some things we must check ..

a first step of loading printer

Step into two Lift the motherboard

CODE diode D1 checks on board after measured by the tester then checks transistors Q1 and Q2 with Code Recently step Check IC Power with IC6 Code

so that now only the natural bro Power IC die

so after the lifting champion IC Power did he live

so that is all enough sharing of my beak yes, hopefully inspire

HOW SERVICE EPSON L210 OFF TOTALY

Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Striped prints on Epson LQ-2180 type, or the like, and LX-300 or the like make-case characters be imperfect, especially if you print the figures (figure 8 can be like the number 0 or number 6), and of course disturbing sight when we read it. What's worse if used to print the bill / invoice, can-can not be paid our bill for writing figures are not clear .. !!

Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Image Epson LQ2180

If we look printer Epson LQ-2180Printer Epson LQ-2180 carefully there are some parts that are not printed so as to make prints as if there is a line extending from left to right. This is due to the print head which consists of pin-pin / needle head (Epson LQ-2180 have amounted to a 24 pin head pin head, the Epson LX-300 has a 9 pin head) damaged or other causes which make the print head is not functioning properly.

So in short if the results of the striped print on Epson dot matrix printer is because there is damage:

1. Print Head Damaged, and or

2. Head cable is damaged, and or

3. Motherboard defective (due to the pin head is also controlled by the motherboard)

Is his head alone could be improved? The answer is that it can! namely by replacing some of the pins (needles) are damaged (Of course, should be entrusted to experienced technicians), but if the pin head which damaged numerous should replace the print head.

While damage to the cable head must be replaced by new, and motherboard can still be improved).

NB: Epson dot matrix printer type:

LQ-1170 LQ-2170 >> >> LQ-2180

LX-300 LX-300 + >> >> LX-300 + II

Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Monday 22 June 2015

BEST FREE RESETTER CANON SERIES MG MP IP SERVICE TOOL V3400

SOFTWARE SERVICE TOOL V3400 CANON

Resetter Canon Service Tool v3400 is the latest version of the tool to reset the printer Canon MG5270, MP258, MP 287, MP 278, MP 237 and iP2770. If your printer has been reset using the previous version v.1074 resetter v.2000 but still stubborn and do not want to reset or always not responding then it can try again by using resetter Canon Service Tool v3400 this.

This afternoon I received a report by the friends work together, he complained that he uses iP2770 printer blink / blinking as much as 4x, light yellow flame 4x continuous and position cartridge not want to pull over, always in the middle. Initially, the prediction I was one cartridge undetected, usually caused by ink attached to the pin CARTRIDGE. Then I clean the pins on cartridge but has not produced results. Then I try to reset it manually and successful light green again and the cartridge will pull back.

To reset the printer must be in a state Service Mode.
Here's how:

1. Turn off the printer by pressing the POWER button. Do not unplug the power cord.
2. Press and Hold the STOP / RESET then press the POWER button. So both buttons depressed position.
3. Release the STOP / RESET but do not release the button powerd
4. In the state of the POWER button is still depressed, press the STOP / RESET 5 times.
5. Your computer will detect the new hardware. Ignore it.
6. Here Download Resetter Canon Service Tool v3400

The next step Exctract and Run Service Tool v3400 that was downloaded earlier. Then follow these steps:

1. On the menu clear ink absorber counter select Main and then click SET on the right.
2. On the menu select Main ink absorber counter SET and then click on the right.
3. Then click EEOPROM. then the printer will print one page.
4. Done.

Canon will be normal again.
So hopefully your printer can all be normal again.

BEST FREE RESETTER CANON SERIES MG MP IP SERVICE TOOL V3400

How To Resetter Epson L311 Series

Image Epson L

How To Resetter Epson L311 Series

Epson Printer series L a lot of popping after the first version of the series Epson L100. Printer series is indeed very popular with the infusion system features that have been provided factory. Now many printers Epson L Series of whom are still ready stock at computer stores such as L311,
But all of that has a printing limit, so that when the printer has reached and even exceeded the limits of the printing, the green and red lights on the printer blinks called "blinking" and on your computer screen will display a dialog box "Service Required". This happens because the Waste Ink Full, therefore it must be done reset software. Here I share Resetter Software Epson L311 Series,

How To Resetter Epson L311 Series

1. Turn your Epson printer series L
2. Run the program Resetter Epson L311, means of double clicking on the file AdjProg.exe. If you have not got the software resetter click HERE TO DOWNLOAD SOFTWARE
3. In the next dialog box click the SELECT button to select the model of printer that will be reset.
4. Once selected printer model and its Port then click the Particular adjustment mode.
5. In the next dialog box select the "waste ink pad counter" and then click the OK button.
6. After the dialog box "Waste Ink Pad Counter", tick Main Pad Counter. Well, in this dialog box there are two buttons that check and initialization. Check button is used to check the ink point that has come out of our software which will be reset to 0 (zero), then the Initialization button is used to reset the Pad Counter (main).
7. If successful finish eating the reset process by pressing the button FINISH.Printer returned to normal as a new still buying, because its function has returned to 0 (zero).That is all and thank you. Hope it is useful.

How To Resetter Epson L311 Series

How To Resetter Epson L220 with software

Image Epson L120

Epson Resetter way for L220 Series,

Epson Printer series L a lot of popping after the first version of the series Epson L100. Printer series is indeed very popular with the infusion system features that have been provided factory. Now many printers Epson L Series of whom are still ready stock at computer stores such as L220,
But all of that has a printing limit, so that when the printer has reached and even exceeded the limits of the printing, the green and red lights on the printer blinks called "blinking" and on your computer screen will display a dialog box "Service Required". This happens because the Waste Ink Full, therefore it must be done reset software. Here I share Resetter Software Epson L220 Series,

Epson Resetter way for L220 Series,

1. Turn your Epson printer series L

2. Run the program Resetter Epson L220, by means of double clicking on the file AdjProg.exe. If you have not got the software resetter

click HERE.

3. In the next dialog box click the SELECT button to select the model of printer that will be reset.

4. Once selected printer model and its Port then click the Particular adjustment mode.5. In the next dialog box select the "waste ink pad counter" and then click the OK button.
6. After the dialog box "Waste Ink Pad Counter", tick Main Pad Counter. Well, in this dialog box there are two buttons that check and initialization. Check button is used to check the ink point that has come out of our software which will be reset to 0 (zero), then the Initialization button is used to reset the Pad Counter (main).
7. If successful finish eating the reset process by pressing the button FINISH.Printer returned to normal as a new still buying, because its function has returned to 0 (zero).That is all and thank you.

Hope it is useful.

How To Resetter Epson L220 with software

Sunday 21 June 2015

How to Solve Error Code of Canon MP145 MP150 MP160?

How to Solve Error Code of Canon MP145 MP150 MP160? Perhaps there are some of you and a buddy who asked such a thing? The printer has a brand Canon MP sometimes indeed many types of problems that occur, and how do I fix this?

Previously never wrote about signs Error Code List Canon MP145 MP150 MP160. Well, here's a more complete discussion of the Error Code MP145 and also how to resolve Error Code of Canon MP145 MP150 and MP160 can be done:cara-mengatasi-error-code-canon-mp145


Image Canon mp145

# Canon MP145 Printer Error E2 (No Paper)

Sometimes when we want to use the printer when the paper is already prepared to the printer but the printer will not pulling the paper, instead appearing in the E2 warning indicator yach why? Though the paper towing baik2 not wrote some broken.
This is likely due to foreign objects that enter into the towing section of the paper.
Try checking some more open cashing printers and scanners, can only be viewed as a whole drawer paper.

# Canon MP145 Printer Error E3-3 (Paper Jam)

At the time of paper jam:
- Try enter at least 3 sheets of paper
- Then press the resume to resume printing
- The printer will pull some paper
- if until the third paper E2 appears, immediately turn the printer off (unplug the power cord and USB cable)
- Wait 5-10 minutes
- Turn back (printer of this type usually takes restart let me not recall the errors that previously occurred)
- If this trick not work either, try unloading and check whether there is trouble or not.

# Canon MP145 Printer Error E4 (No Ink)

- Press the reset button for 10 seconds while printer proces

# Canon MP145 Printer Error E5-5
(The ink cartridges are not installed or non-supported ink cartridge is instaled or the ink cartridges are not installed properly)

Ink cartridge there who have problems or also even his home cartridge that trouble.
- Try disconnecting cartridge
- Then turn the printer off (unplug the power cord and USB cable) for + - 10 minutes
- Turn the printer back
- Then reattach his cartridge
- Try to do repetitive
- If not work either, meaning the need to replace the cartridge her

# Printer Canon MP145 / MP160 Error E8
(Waste ink absorber full, or platen waste ink absorber full)

- Squeeze and hold the Stop / Reset (not released before the command)
- press and hold the On / Off button (not to be removed before any command)
- Release the Stop / Reset
- Click on the Stop button 2x / Reset
- Release the On / Off (wait until the printer standby toward service mode)
- Click on the Stop button 4x / Reset
- Click on 1x On / Off button
- Turn off the printer and finish

Turn on the printer again and the printer will return to normal as before, and then try to test print will appear message E16 (if a cartridge two new ways, the message will not appear E16) means cartridge reset request.
Here's how:
- Squeeze and hold the Stop / Reset for doing 2x +/- 30 seconds.
Resetter error code E8 above can also be applied to the canon MP160

# Canon MP145 Printer Error E14
(Ink cartridges Whose destination are wrong)

- Try Remove the second cartridge then turn off the printer
- Then turn on again then reinstall its cartridges
- If still E14 error, try changing that different cartridge types. If his first change with 40/41 830/831 and vice check (can borrow have a friend).
- If not display an error message again, turn off the printer for 5 minutes.
- Turn again and open the printer cover
- Turn off the printer (unplug the power cord) wait for 10 minutes
- After the restart, and reconnect your old cartridge. succeed.
If using the old cartridge is still an error, while not a new cartridge error, it means you cartridge damaged
- If not it could be (still error E14), meaning "Home Head Place the cartridge of his" broken or surge.
So it should be brought to a handyman service printer, can not be fixed with The resetter because hardware that trouble.

# Canon MP145 Printer Error E15 (Ink Low)

- Press the reset button for 5 seconds. If not possible, Possible Cartridge color printer or black ink do not read because the pin Cartridge some dirty or damaged
- Try Clean pin its cartridges
- If still error means that its cartridges trouble
- Try new-replace cartridge or try to borrow have a friend first
- If the cartridge can have a friend, Try turning off the printer and replace your cartridge.

# Canon MP145 Printer Error E16

- The solution press the reset button for 5 minutes

--- >>

# Canon MP145 Printer Error E22 (Carriage Error (5100))

- Carriage unit (main unit)
- Timing slit strip films
- Logic board
- Carriage motors (main unit)
This error is an error on the hardware, so it does not work on reset, ... try to disassemble your printer, then check whether there are foreign bodies that impede his path home Cartridge ... Cause E22 Cartridge usually because the home can not move on track, .. maybe the infusion hose loose so make home Cartridge stuck, .. let loose infusion, then test print, .. if E22 does not appear there on the hose means the problem infusion, infusion hoses .. improver in order not to involve the other printer parts, ...

# Canon MP145 Printer Error E23 (Paper Feed Error)

E 23 Paper Feed Error (6000) - Timing sensor
- Timing movie slit disk (main unit)
- Feed roller (main unit)
- Logic board
- Paper feed motors (main unit)
This error can not be reset, .. try to check the hardware part of the paper drawer, open the printer chasing, continue disconnect the scanner on the printer. Now there will be visible hardware towing the paper, check if there are broken or there is a loose loose fixed in that section or even no intruding foreign bodies in there. If indeed not dare (not experts) to open the printer fear is broken please do not do, moment worse damage because it was forced open.

# Canon MP145 Printer Error E24 (Purge Unit Error)

E 2 4 Purge cam sensor error (5C00) - Carriage unit (main unit)
- Timing slit strip films
- Logic board
- Carriage motors (main unit)
Purge unit error Cartridge try to check the parking lot, in the lower right corner of the printer there is a section for cleaning the print head, .. possibility that section hampered foreign object that is not running as usual, .. clean the parts and then do a test print ..

# Canon MP145 Printer Error E26 (Internal Temperature Rise Error)

Internal temperature rise error ... This error occurs in the printer motherboard due to not being able to withstand the heat, .. hati2 put the printer, let your printer is stored in a place that is too hot..solution try to replace Motherboard ...

# Canon MP145 Printer Error E28
(Ink cartridge Error Temperature Rise (5200) - Print Head)

if many Cartridge currently vacant or leftover ink is low (low ink), it will make the print head on fire, .Or because Cartridge often in pairs or too loose or it could be because in the store in which the heat. then the error appears, try the solution .. in rechargeable cartridge, wait bbrp hours and then run the printer back, .. if unsuccessful forced to change Cartridge. ,

# Canon MP145 Printer Error E42 (Scanner Error)

Scanner error (5010) - Scanner unit
- Logic board, this error can not be reset,
It is caused by imperfect Scanner Work. Try unloading scanner section and check the data cable (similar ribbon width and length) damaged parts of scaner slow lorises check that no wires loose / torn. (Most likely) If yes correct the data cable. If not check the other parts of the power socket sacnner sometimes less Pas / slack. cara-mengatasi-error-code-canon-mp145.

How to Solve Error Code of Canon MP145 MP150 MP160?

Wednesday 3 June 2015

HP LaserJet 1010 Reviews

REVIEWS

HEWLETT PACKARD LaserJet 1010 is surely an entry-level laser inkjet printer from Hewlett-Packard ideal for home users or micro-offices who wants to find a printing equipment that could produce quality output plus a higher printing ability than most inkjet printers. It offers monochromatic printing but can deliver your printouts having a satisfying print pace of 12 ppm (pages per minute). If you’re not buying a color laser inkjet printer afterall, then the HP LaserJet 1010 can suit you, providing you professional-looking monochrome printouts.

Inkjet printer Specifications:

echnology: Born
Interface: USB
Max Resolution: ( B&W ) six hundred. 0 dpi times 600. 0 dpi six hundred dpi
Processor: 133. 0 MHz
Regular monthly Duty Cycle: (max) 5000 web pages
Power Consumption: 214. 0 Watt (Operational) | 7. 0 Watt (Stand by/Sleep)
OPERATING-SYSTEM Required: Microsoft Microsoft windows 2000 / XP

Another thing about the HEWLETT PACKARD LaserJet 1010 is that it very easy to perform, it’s software installing won’t take too much of your time andwalks anyone through connecting the printer and printing out a test page to check everything’s OK” while Expert Reviews use it. It also has a utility drive called the HP LaserJet Toolbox, a series of Webpages and a supporting Windows-based application that provide use of printers firmware capabilities, making them available on a browser-driven program where printer properties will be displayed and manipulated.

The HP LaserJet 1010 is a superb enough laser printer intended only to be used by starting business or at home, since it probably won't handle a much larger volume to produce compare to other office laser units. It’s graphic end result are good also, but isn’t that helpful when it comes to printing black-and-white photos.

“Output quality will be reasonable. Text quality shows potential to be really good, but is marred by slight smudging along the lower edge involving characters – you should look very closely to get noticable this, ” explained Expert Reviews. “The LaserJet 1010’s cheap print engine handles graphics well enough. Graduated greys are specifically smooth, although coarse half-toning (the typical pattern of dots employed to make up images) helps make photos disappointing. The LaserJet 1010 lives up to its quoted pace of 12ppm, and takes simply just over 10 seconds with the first page.”

HP LaserJet 1010 Reviews

Reset counter Samsung ML - 1860 Computer printer

REVIEW

Why Samsung ml-1860 must be reset:
– Samsung ml-1860’s cartridge is enclosed using a toner chip that's used to compute toner coverage and to deliver bold or even light printout quality determined by printer original printout design and style.
– Samsung ml-1860 toner processor contains calculated limitation that's managed by Samsung maker. Following Samsung, when toner coverage is 5%, Samsung ml-1860 toner processor is delivered 1. 500 – 3. 000 pages.
– If toner coverage is higher than 5% -> Toner Page Yields are below “1. 500 – 3. 000″ pages. If toner coverage is leaner than 5%, Toner Page Yields are “1. 500 – 3. 000″ pages. That is the reason why bold printouts (high toner coverage) will make printer run beyond toner quickly.
– Whenever Samsung ml-1860 toner processor overload its determined limitation, printer will be locked inspire connected with high toner cartridge.

When Samsung ml-1860 must be reset:
– Samsung ml-1860 printer’s emails: red light blinking, imprinting.
– Computer’s emails: empty toner, Replace toner, install toner, finish of life replace new cart, toner cartridge is just not installed, Install this cartridge, toner exhausted.

How to totally reset Samsung ml-1860 Computer printer:
1. Connect personal computer to printer simply by usb cable.
3. Turn printer upon and wait until it can be ready for doing the job.
3. Run “download. bat”(or get and drop *. high-definition file to usbprns2. exe file) data file on computer.
4. “download. bat” data file program will on auto-pilot run printer’s firmware. After automatic setup process, printer will be restarted by by itself.
5. Restart printer once more -> in examination.

Reset counter Samsung ML - 1860 Computer printer

Thursday 28 May 2015

Guidelines Reset Ink Tank Full Error Canon iP1200


Image Canon Ip1200

Guidelines Reset Ink Tank Full Error Canon iP1200

the blogger friend who has a printer Canon Pixma iP1200
there may be a need drivers or resetter tool can be downloaded at the link below the course ..
well for those who need a driver please download and
for those of you who need resetter tool also please download ...

First stage (Reset Hardware)

Click Here To Download Driver's if necessary

Turn off the printer, and then unplug the power cable.
Press and hold the Power button (use your index finger to hold the power button).
Replace the power cord.
Use the middle finger to press the Resume button 2 times.
Remove your index finger on the Power button.
You have completed the first stage to reset the Ink Tank Full Error (power light blinks).

Second stage (Reset Software) for Permanent

Download iP1200 and 1600 Click Here To Download Resetter
Make sure all file attributes of Read Only.
Run GeneralTool.exe
On USB Port choose your printer port.
Select (tick) EEPROM CLEAR
Provide blank paper for printing. Then click the Test Pattern 1
Finish your printer iP1200 and iP1600 normal again.

Hopefully the article How reseter Printer Canon Pixma IP 1200 is beneficial,