Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Striped prints on Epson LQ-2180 type, or the like, and LX-300 or the like make-case characters be imperfect, especially if you print the figures (figure 8 can be like the number 0 or number 6), and of course disturbing sight when we read it. What's worse if used to print the bill / invoice, can-can not be paid our bill for writing figures are not clear .. !!

Fixing printer Epson LQ-2180 and LX-300 when the striped print results

Image Epson LQ2180

If we look printer Epson LQ-2180Printer Epson LQ-2180 carefully there are some parts that are not printed so as to make prints as if there is a line extending from left to right. This is due to the print head which consists of pin-pin / needle head (Epson LQ-2180 have amounted to a 24 pin head pin head, the Epson LX-300 has a 9 pin head) damaged or other causes which make the print head is not functioning properly.

So in short if the results of the striped print on Epson dot matrix printer is because there is damage:

1. Print Head Damaged, and or

2. Head cable is damaged, and or

3. Motherboard defective (due to the pin head is also controlled by the motherboard)

Is his head alone could be improved? The answer is that it can! namely by replacing some of the pins (needles) are damaged (Of course, should be entrusted to experienced technicians), but if the pin head which damaged numerous should replace the print head.

While damage to the cable head must be replaced by new, and motherboard can still be improved).

NB: Epson dot matrix printer type:

     LQ-1170 LQ-2170 >> >> LQ-2180

     LX-300 LX-300 + >> >> LX-300 + II

Fixing printer Epson LQ-2180 and LX-300 when the striped print results