How To Reset Canon Mp145

How To Reset Canon Mp145

Canon Pixma Mp145

How To Reset Canon Pixma Mp145

Actually, to reset printer canon mp145 is almost the same for all series. Only a few differences in the steps. But, to reset the canon MP145 printer software is not required, but everything is done in hardware. How do I reset this

The steps are as follows:

Turn off the printer Canon MP145.
Press and hold the Stop / Reset (red inverted triangle icon).
While still pressing the Stop / Reset, Press and hold the Power button.
Release the Stop / Reset without releasing the Power button.
Double Click the Stop / Reset, here printer will enter service mode. where the printer will not work until we are out of service mode-Power button
Wait a while until the printer is doing warming up, and when the printer is loaded, (green indicator light) press the Stop / Reset key four times quickly.
Turn off the printer to exit the service mode.
Turn on the printer again, klo printer has not demonstrated error, then reset the Canon MP145 has succeeded.
How to reset the Canon MP145 I have tried and succeeded. Please follow the tips above with risk borne alone ..

How To Reset Canon Mp145

ERROR CODE AND RESET CANON MP145, MP160
E2-2 = No paper (ASF)
Paper hour E3-3 =
E4 = no ink / cartridges
E5-5 = ink cartridges are not installed or installed incorrectly cartirdge (not compatibel)
E8 = absorber full, or platen waste ink absorber full mita reset
E9 = relation to the digital camera / video camera does not support
E14 = Ink Cartridges Whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = problems on the scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error (parts cleaning pump head)
E25 = ASF (cam) sensor error
E26 = Internal temperature rise error
E27 = ink absorber full or platen waste ink absorber full> reset with such tools
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = motor driver is not normal
E40 Other hardware error 20 =
E42 22 = Scanner error

How To Reset Canon Mp145