How To Reset Canon Mg2170

How To Reset Canon Mg2170

Canon Pixma Mg2170

How To Reset Canon Mg2170

When MG2170 , MG2270 and MG5270 is turned on , it will immediately appear error P07 / E08 at its LCD panel . And if we do a print command , the monitor screen will show " The Ink Absorber is Almost Full " . Caption MG2170 , MG2270 and MG5270 Error P07 and E08 on the screen as follows ( sorry picture illustration only ) :




Then how to cope with Canon MG2170, MG2270 and MG5270 P07 and E08 Error:
How to Reset Canon MG2170, MG2270 and MG5270 P07 and E08 Error

1. Turn Printer Canon MG2170, MG2270 and MG5270, then in its LCD panel will display an error P07 /       E08, and there is a description of "The Ink Absorber is Almost Full" on the screen of your monitor.
   click here to download drivers


2. Click Here To Download Resetter Canon Mg2170
    You will be directed to the first ad, then click SKIP ADS / SKIP.

3. Printer Canon MG2170, MG2270 and MG5270 must be in a state of SERVICE MODE. Do I read next step.

4. Turn off the Canon MG2170, MG2270 and MG5270 are error P07 / E08 by pressing the power. Do not unplug the power cord

5. Press and Hold the STOP / RESET followed by pressing the POWER button. So both buttons depressed position.

6. Release the STOP / RESET but do not release the POWER button.

7. In the state of the POWER button is still depressed, press the STOP / RESET 5 times.

8. Then release both buttons simultaneously. Then Canon MG2170, MG2270 and MG5270 will be in the Service Mode.

9. LCD Panel MG2170, MG2270 and MG5270 will be blank / dark and on your computer will detect the
new hardware. Ignore it ...

10. You still with ekohasan blog, the next step Exctract and Run Service Tool 3400 you downloaded earlier.

11. The menu is Clear ink absorber counter select Main and then click SET on the right.

12. The ink absorber counter menu select Main and then click SET on the right.

13. If an error occurs when clicks set 002 etc., fluctuates choice in ink absorber Counter menu, then click set up ix6560 error reply 5B00 successfully reset.

14. Then click EEOPROM. then the printer will print one page.

15. Printer Canon MG2170, MG2270 and MG5270 are error P07 / E08 will be normal again.
Good Luck ....

How To Reset Canon Mg2170