Tuesday, 28 April 2015

How to Overcome Paper Jam Printer Canon Pixma MP237


How to Overcome Paper Jam Printer Canon Pixma MP237


How to Overcome Paper Jam Printer Canon Pixma MP237
Canon Pixma Mp237

How to Overcome Paper Jam Printer Canon Pixma MP237

For some people if something happens to the goods which he had would have panicked. Indeed, it could be reasonable because such goods are goods that are very valuable to him. In this example, the printer is used for daily work, for school or college assignments, paper making and others.
One problem that often arises in the printer is the paper jam problems. Actually, for any problems or errors that occurred in the printer is always a notification on the LCD monitor us. One is a paper jam that is marked by blinking three times on the Canon Pixma MP237 printer how to solve it is to unplug the paper that get stuck in the printer and push the paper put (rear tray) back until you hear a 'trak' then press one button black or color while the printer will return to normal.



However, if the same error still occurs then to overcome Paper Jam at the Canon Pixma MP237 printer, try to follow these steps:

Open the printer cover, then open a place to put the cartridge, then close the cover of the printer without closing a cartridge. After that will come the error 1687 (the fine cartridge is not installed properly, then turn off the printer and unplug the power cord. Open the printer cover, and then attach a cartridge cover properly. Restart the printer and try to print a single page.


How to Overcome Paper Jam Printer Canon Pixma MP237


In other cases the printer that uses ink hose note infusion system, usually that makes the paper jam because the IV stand in the way cartridge try to move the cartridge but the printer is turned off, see what hinders the movement of the hose cartridge or not. See also How to Replace Damaged Cartridge Infusion.





In other cases the printer that uses ink hose note infusion system, usually that makes the paper jam because the IV stand in the way cartridge try to move the cartridge but the printer is turned off, see what hinders the movement of the hose cartridge or not. See also How to Replace Damaged Cartridge Infusion.




Or in case I have ever experienced is gear / serrations or mechanical contained inside the printer is damaged or broken try to see if it is broken so replaced.
Capitalize desperate I tried loading my printer, the Canon Pixma MP237 printer article is only about four months I bought, either because the intensity of the work that many or indeed the quality of this printer is not good, because since recently purchased when used for 'ngeprint' her voice slightly often rough sound 'gutrak-gutrak' so, hehehe ....
Here I took pictures of my Canon Pixma MX366 has damaged other parts of the gear is still normal but then I 'Canibal' phrase to the Canon Pixma MP237. And Canon Pixma MP237 Printer was back to normal.






Oh yes, the results of this experiment I also managed to find the drain hose color ink at the bottom there is a mechanic. Because I think dumps ink only one path, apparently this time I made the color drain only the black ink, while the disposal of color ink still remains inside. Hehehe .....
Tips from me when using a Canon Pixma MP237 printer, try using Quite Mode albeit somewhat slower performance but will slightly reduce the noise of the sound alias 'gutrak-gutraknya' as well as smooth the movement of the mechanical system.

Hope It Is Useful!


The following error codes that often occurs in the printer Canon MP 237 and fix what I can from mbah Google:


Error 1486, 1487: Fine Cartridge is not installed in the correct position, accompanied by blinking 7x and how to overcome them is to make sure it is correct cartridge installation if it still happens try to replace it with a new cartridge.
Error 1000: The printer is out of paper / paper does not feed, Characterized by blinking 2x on Canon MP 237 and to overcome them enter into the rear paper tray and then press the Black / color on the Printer
Error codes 5011, 5012, 5200, 5400, 5700, 6000, 6800, 6801, 5B00, 6930, 6931, 6932, 6933, 6936, 6937, 6938, 6940, 6941, 6942, 6943, 6944, 6945, 6946: and how The fix is ​​to unplug the printer power cable that connects to the electricity for a few minutes and then turn it on again.
accompanied by blinking 14x because the cartridge is improperly installed or is not compatible with the printer cartridge, replace with a new cartridge.
 to overcome them clean paper concerning the printer.
Error B200: Blinking 10x, Turn off the printer and then unplug the power cable that connects to the mains for a few minutes and then plug it in and turn it on again.
blinking 16x and how to overcome them press the stop / reset for 5 seconds.
on Canon MP 237 and how to overcome them take the paper relating to the printer.
marked blinking 4x on canon printer MP 237 and how to overcome it, make sure it is correct cartridge installation and locking the cartridge.
 by blinking 8x and how to overcome them is do head cleaning on Canon MP 237 printer.
accompanied by blinking 13X because the printer can not detect the ink levels, press the stop / reset for 5 seconds to ignore the error.
 installed properly, accompanied by blinking 5x and how to cope post cartridge is correctly if it still happens replace it with a new cartridge.
accompanied by blinking 15x and how to handle it is to replace it with a new cartridge for the old cartridge has been damaged.


Hope It Is Useful!

How to Overcome Paper Jam Printer Canon Pixma MP237




2 comments:

  1. Such a very useful article. Very interesting to read this article.I would like to thank you for the efforts.
    Epson Printer has shown some issues while using. Call at 0800-098-8352 Epson printer helpline number UK is the only place that gives you solution for all the issues that you face while using it.

    ReplyDelete
  2. I have a paper jam error problem. Before, it has these series of rolling noises (probably loading or reserting, i dont know) then after the noises stop, it prints fine..

    then after a few weeks, it suddenly goes like, even before that long rolling noise stops, it loads the paper and releases on the other side fast and a "paper jam" notification appears on my laptop screen. I reset the printer, making again those series of noises. And again, it pre-loads a paper then, paper jam notification. Always like that over and over until it finally decides to print. Im taking 30min to an hour just to print 1 page.

    Now, there is a new problem. After the whole paper jam and reseting, the printing queue is automatically deleted like the printer has printed the document. But no document was printed, only that paper jam issue.. very very frustrating

    I already reintall the printer to my laptop several times. What can i do?

    ReplyDelete