samsung subdue the paper jam
 |
| Samsung Laser Printers |
samsung subdue step paper jam
Beam of light Color Printing: The best way to fix the miscalculation 'Paper hours x'
Meaning: Paper Jam within tray 1
Your tray 1
When the paper is jammed inside the feeder area, follow these steps to discharge the jammed report.
1. Using this handle, open this cover as wide.
2. Remove this paper carefully, by attracting the direction revealed below.
3. Close the leading cover.
※ Careful attention
If the front cover isn't closed, the device won't operate.
4. Yank the tray 1
5. Take away the jammed paper by simply pulling it right slowly as revealed below
6. Insert tray 1 back in the device right up until it locks straight into place. Printing on auto-pilot resumes
Message: Quickly pull inside machine
Inside fuser unit place
※ Note
Diarea warm fuser unit. Be aware when removing paper from your device
1. Open the superior cover
2. Open the inner cover with all the handle..
Warning
Will not touch the fuser inside the inner cover. It really is hot and will make the skin burn! Operation fuser temperature is 180 ° G. Be careful whenever removing paper from your machine.
3. Pull up this paper jam lever for you to loosen the fusing section of the fuser unit, then carefully remove the jammed paper from your printer.
4. Mass media down the report jam lever for you to fasten the fusing portion.
5. Close this cover inside.
6. Following removing the stuffed paper, check paper which may be jammed in other parts of the system.
7. Close the superior cover. Make confident the cover is usually locked tightly.
Meaning: Jam in leave area.
1. Open and close the leading cover securely. Jammed paper will automatically exit from your device
2. Gently pull the paper out of your tray out should you not see the stuffed paper or if you experience resistance when anyone pull. Stop and go into the fuser unit place
3. Open and close the leading cover to continue printing.
Warning
When the top cover isn't closed, the device won't operate.
Related Data Models.
CLP-770ND.
Meaning: Paper Jam within tray 1
Your tray 1
When the paper is jammed inside the feeder area, follow these steps to discharge the jammed report.
1. Using this handle, open this cover as wide.
2. Remove this paper carefully, by attracting the direction revealed below.
3. Close the leading cover.
※ Careful attention
If the front cover isn't closed, the device won't operate.
4. Yank the tray 1
5. Take away the jammed paper by simply pulling it right slowly as revealed below
6. Insert tray 1 back in the device right up until it locks straight into place. Printing on auto-pilot resumes
Message: Quickly pull inside machine
Inside fuser unit place
※ Note
Diarea warm fuser unit. Be aware when removing paper from your device
1. Open the superior cover
2. Open the inner cover with all the handle..
Warning
Will not touch the fuser inside the inner cover. It really is hot and will make the skin burn! Operation fuser temperature is 180 ° G. Be careful whenever removing paper from your machine.
3. Pull up this paper jam lever for you to loosen the fusing section of the fuser unit, then carefully remove the jammed paper from your printer.
4. Mass media down the report jam lever for you to fasten the fusing portion.
5. Close this cover inside.
6. Following removing the stuffed paper, check paper which may be jammed in other parts of the system.
7. Close the superior cover. Make confident the cover is usually locked tightly.
Meaning: Jam in leave area.
1. Open and close the leading cover securely. Jammed paper will automatically exit from your device
2. Gently pull the paper out of your tray out should you not see the stuffed paper or if you experience resistance when anyone pull. Stop and go into the fuser unit place
3. Open and close the leading cover to continue printing.
Warning
When the top cover isn't closed, the device won't operate.
Related Data Models.
CLP-770ND.
No comments:
Post a Comment