Sunday, 3 May 2015

Printers Paper jam in MX870


Printers Paper jam in MX870 ?

printer position



Printers Paper jam in MX870

Hi franlynn2,

Use the following diagrams to remove paper jams depending on your scenario:

Paper Is Jammed in the Paper Output Slot or the Rear Tray

Remove the paper following the procedure below.

 1.  Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.

Printers Paper jam in MX870

   2. Reload the paper, and press the OK button on the machine.

    If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if necessary.
    

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.

  Paper Is Jammed inside the Machine at the Transport Unit

Remove the paper following the procedure below.

  1. Detach the Rear Cover.

Printers Paper jam in MX870
printer position

2. Pull the paper out slowly.


Printers Paper jam in MX870

printer position



1. Attach the Rear Cover.

Push the left side of the Rear Cover until it is closed completely.










Printers Paper jam in MX870
printer position

If you were not able to remove the paper out in step 2:

   1.  Remove the Cassette.

   2.  Pull the paper out slowly.

Printers Paper jam in MX870
printer position
   3.  If any paper is sticking out of the Cassette, remove the paper, align and reload the paper in the  Cassette.
  If you did not remove the jammed paper out in step 1 to 5 when automatic duplex printing, check the duplex transport section.

    

   4.  Insert the Cassette into the machine again, and press the OK button on the machine.

    If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if necessary.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.

Jammed Paper Is Not Removed out When Automatic Duplex Printing

Before removing the jammed paper, see Paper Is Jammed inside the Machine at the Transport Unit to remove it from Transport Unit. If the paper jam error continues, remove the jammed paper following the procedure below.

   1.  Turn off the machine, and unplug the power cord of the machine from the power supply.

    2. Remove the Cassette.

    If the paper is loaded on the Rear Tray, remove the paper from the Rear Tray and retract the Paper Support.

    3. Set the machine upright with the left side down.
    

   4.  Slowly pull the jammed paper out so that the paper does not tear.



printer position
    5. Align the paper, then reload it in the Cassette.
    Reload paper in the Rear Tray, if necessary.
    

    6. Insert the Cassette into the machine again.
    7. Plug the machine back in and turn the machine back on.
    All print jobs in queue are canceled. Reprint if necessary.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center.


In Other Cases

Make sure of the following:

    Check 1: Are there any foreign objects around the Paper Output Slot?

    Check 2: Are there any foreign objects in the Rear Tray?


Printers Paper jam in MX870

printer position
If there are any foreign objects in the Rear Tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.

Printers Paper jam in MX870

printer position
  • Check 3: Is the Rear Cover closed completely?
  • Check 4: Is the paper curled?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

Printers Paper jam in MX870

No comments:

Post a Comment