Error Code Canon Mp Series

 Error Code Canon Mp Series

image Canon Mp258

 Error Code Canon Mp Series

Printer Error Code Canon MP 258, How to repair damaged Canon Pixma MP 258 with error code displayed on the printer such as Canon MP 258 Printer Out Of Paper, Paper Jammed, The Ink Has Run Out. Printer Error Codes Canon MP 258 is equal to the error code Printer Canon MP 287, the error on the Printer Error Code Canon MP 258 All in One Multifunction usually displayed on the LED Printer Canon MP 258.When an error occurs in the printer Canon MP 258, the alarm light is amber and will cause letters E for error with error code such as E 02, E05, E 08 and other or also with Letter P for Power accompanied by error code such as P 02, P10. Then after the error code displayed on the LED then check Printer Error Codes on Canon MP 258.Printer Error Codes Canon MP 258 And How to Fix and Troubleshooting Printer Canon MP 258;

1. E02 Canon MP 258: Printer Out of Paper (Printer is Out of Paper) or the paper did not go well. Load paper correctly.

2. E03 Canon MP 258: Paper Jam (Paper Jammed) or Output Paper Closed. Open the Paper Output, Reload paper correctly.3. E04 or E05 Canon MP 258: Cartridge is not detected / not by the printer (The FINE Cartridge can not be Recognized). Cartridges must be installed properly or not Compatible, Try Remove Cartridge, then plug it back by pushing the Lock cartridge until clicking into place.Canon MP 258 

4. E07: Cartridge is not installed in the correct position (The FINE Cartridge is not installed in the correct position). Check whether Cartridge Black / Color is already in the correct position.5. E08 Canon MP 258: Ink absorber is almost full (Ink absorber is almost full). Press Black or Color button on your printer to Continue Printing (Continue Printing) www.nazirprinter.com.Canon MP 258 

6. E13: The remaining ink can not be detected (The Remaining ink level can not be detected). Ink Cartridge Replace with new and original. If you want to continue without replacing the new cartridge, Press the STOP / RESET on your Printer For 5 seconds.Canon MP 258 

7. E14: Cartridge not recognized (The FINE Cartridge can not be Recognized). Replace the old cartridge with a new cartridge.Canon MP 258 

8. E15: Cartridge not recognized (The FINE Cartridge can not be Recognized). Cartridge is not installed correctly. Try Remove the cartridge Then reinstall the lock into place until you click the Cartridge.Canon MP 258 

9. E16: The ink has Run Out. If the printer is printing data, press the STOP / RESET for 5 seconds and then continue your printing. Replace empty Ink Cartridge.Canon MP 258 

10. E30: The document is too small when "Fit Copying is Selected", check the document on the scanner.Canon MP 258 

11. E31: The printer is not connected to the computer (The printer is not connected with the computer). Connect the USB cable from the printer to the USB port on the computer www.nazirprinter.com.Canon MP 258 

12. E50: Scanning the print head alignment sheet has failed, Press STOP / RESET. Make sure the paper loaded (A4 or other size) in accordance with the print head alignment, and also paper in the correct position and the glass plate was not dirty. Also make sure the Print Head Nozzles are not clogged.
When the MP 258 Canon Printer lights blinking alarm lights blinking green and orange alternately;
1. P02 Canon MP 258: Cancel printing and turn off your printer. Clean up / pull the paper in your printer concerns. Perhaps you Cartridge Damaged / Broken. Turn your printer back.2. P10 Canon MP 258: Turn off your printer and then turn it back on.3. Another mistake Canon MP 258: Turn the printer off and unplug the power cable and then plug it back into the printer.

 Error Code Canon Mp Series